產品說明

意大利Scame電動車充電系統 Scame Wall Box ricarica auto elettriche/電動車公共充電設施/電動車輛充電系統/充電網絡/充電裝置/電動車充電設備/自動車充電器
產品名稱:
意大利Scame電動車充電系統 Scame Wall Box ricarica auto elettriche/電動車公共充電設施/電動車輛充電系統/充電網絡/充電裝置/電動車充電設備/自動車充電器
產品型號:
-
相關字:
tesla 電動車充電及各式電動車充電
產品價格:
點擊次數:
587
廣告編號:
SSP06112-71
刊登日期:
2018-02-09 19:03
更新日期:
2018-05-26 06:38
客戶評分:
-
未有任何產品屬性

什麼是電力管理系統?

為家中的電動汽車充電可能會消耗我們家中好多電力,這就是電力管理系統的關鍵之處。
 
實際上,這款獨特的SCAME SMART WALLBOX會根據家中的電力消耗調整充電電流,並使其適應現有家電產品的電力消耗,而無需觸發計數器及避免停電。
 
 

電力管理系統的應用:

SCAME SMART WALLBOX應用於多種範疇,包括包廂、私人停車位、獨立屋及住宅等。有了此電力管理系統功能,不再需要擔心電力供應增加,該設備還可以處理光伏的電流產生。
 
 

意大利Scame自動車/電動車充電系統特點:

- Wallbox Smart符合國際標準(EN 61851-1, EN 62196-1, EN 62196-2 and EN 61439-
- 內置有快門系統IPXXD保護(直接接觸最大程度的保護)
- SCAME電源管理系統經過RSE spa(Italian Company for Energy Systems Research)的積極測試和驗證。
- 由Scame Parre spa在意大利設計,開發和生產

 

 

 

六款意大利Scame自動車/電動車充電系統以供選擇!

 

~~意大利Scame自動車/電動車充電系統示範影片~~

 

款式一:掛牆式電動車充電系統wall-mounted charging station

 

The Wall Box is a wall-mounted charging station with the same features as the UB versions. yet featuring a dedicated design that makes it suitabe for insta lation in domestic or similar environments.

技術參數TECHNICAL CHARACTERISTCS:

Rated current
16A/32A
rated voltage
230VAC/400V
Frequency
50-60Hz
Insulation voltage
250V/500V
Protection degree
IP54
Operating temperature
-25°c to +40°c
Material
Technopolymer
Glow Wire test:
650°c
IK grade at 20°c
IK08
Colour
Gray
Installation
wall-mounted
Saline solution
Resistant
UV rays
Resistant

 

特點FEATURES:

- Mode 3 charging with PWM pilot circuit;
 
- Identification of connected cable size;
 
- Protection against overloads and indirect contacts;
 
- Measurement of power output and current drawn;
 
- Control of proper contactor opening;
 
- Identification of users authorized to the charging;
 
- Management of plug interlock system;
 
- Operation in free stand-alone or personal mode;
 
- Set up for serial communication power management.

 

認證REFERENCE STANDARDS:

EN61851-1 (2011)
Electric vehicle conductive charging system
Part 1: General requirements
 
EN61439-1 (2011)
low-voltage switchgear and control gear assemblies
Part 1: General requirement
 

 

款式二:高度耐腐蝕掛牆式電動車充電系統

 

The Dual Wall Box is a charging station with the same features as the CA and CB charging columns, but characterised by a highly resistant plastic structure and the possibility of wall mounting. Recommended for rooms where the base solution is not possible (e. g, underground garage), it can be equipped with 1 or 2 flush-mounted sockets with anti-removal block Type 2, 3A, 3C

技術參數TECHNICAL CHARACTERISTCS:

Rated current
16A-32A-50A-63A
rated voltage
230 V AC/400V AC
Frequency
50-60Hz
Insulation voltage
250V/500V
Protection degree
IP54
Operating temperature
-25°cto+40°c
Material
Technopolymer
Glow Wire test:
650°c
IK grade at 20°c
IK10
Colour
Grey
Installation
wall-mounted
Saline solution
Rasistant
UV rays Rasistant

 

特點FEATURES:

- Mode 3 charging with PWM pilot circuit;
 
- Identification of connected cable size;
 
- Protection against overloads and indirect contacts;
 
- Measurement of power output and current drawn;
 
- Control of proper contactor opening;
 
- Identification of users authorized to the charging;
 
- Management of plug interiock system;
 
- Operation in free stand-alone or personal mode;
 
- Set up for serial communication;
 
- Power management.
 

認證REFERENCE STANDARDS:

EN61851-1 (2011)
Electric vehicle conductive charging system
Part 1: General requirements
 
EN61439-1(2011)
Low-voltage switchgear and control gear assemblies
Part 1: General requirement.
 
 

款式三:UB配電盤掛牆式電動車充電系統

UB switchboards are wall-mounted charging stations using the modular composition possibilities offered by the SCAME Domino Series switchboards.

 

技術參數TECHNICAL CHARACTERISTCS:

Rated current
16A/32A
rated voltage
230 V AC/400V AC
Frequency
50-60Hz
Insulation voltage
250V/500V
Protection degree
IP44-|P54
Operating temperature
-25°c to + 40°°C
Material
Technopolymer
Glow Wire test: 650°C
IK grade at 20°c
IK07
Colour
Grey
Installation
wall-mounted
Saline solution
Resistant
UV rays
Resistant

 

特點FEATURES:

- Mode 3 charging with PWM pilot circuit;
 
- Identification of the connected cable size;
 
- Protection against overloads and indirect contacts;
 
- Measurement of power output and current drawn;
 
- Control of proper contactor opening;
 
- Identification of users authorized to the charging;
 
- Management of cover locking and plug interlock system;
 
- Management of charging in case of power failure(optional);
 
- Operation in free stand-alone or personal mode;
 
- Set up for serial communication
 

認證REFERENCE STANDARDS:

EN61851-1 (2011)
lectric vehicle conductive charging system
Part 1: General requirements
 
EN61439-1 (2011)
low-voltage switchgear and control gear assemblies
Part 1: General requirement

 

 

款式四:柱式雙面電動車充電系統

 

The CA charging column is a free-standing, two-sided charging station made of painted steel sheet that can be equipped with type 2, 3A, 3C and domestic socket-outlets having a built-in an-tiextraction locking system and with movable outlets with permanently connected cable(case C connection). Suited for private or public open areas, these columns feature removable front panels in Plexiglas that allow quick and easy customisation.

技術參數TECHNICAL CHARACTERISTCS:

Rated current
16A-32A-50A-63A
rated voltage
230 V AC/400V AC
Frequency
50-60H
Insulation voltage
250V/500V
Protection degree
IP54
Operating temperature
-25°c to + 40°C
Material
Steel sheet
Glow Wire test:
-
IK grade at 20°c
K10
Colour
Grey
Installation
free-standing
Saline solution
Resistant
UV rays Resistant

 

特點FEATURES:

- Mode 3 charging with PWM pilot circuit
 
- Identification of the connected cable
 
- Protection against overloads and indirect contacts
 
- Measurement of power output and current drawn
 
- Control of proper contactor opening
 
- Identification of user authorized to the charging
 
- Management of cover locking and plug interlock system
 
- Management of charging in case of power failure
 
- Operation in free stand-alone or personal mode
 
- Set up for serial communication

 

認證REFERENCE STANDARDS:

EN61851-1 (2011)
Electric vehicle conductive charging system
Part 1: General requirements
 
EN61439-1(2011)
 
Low-volatge switchgear and control gear assembl
Part 1: General requirement.

 

 

款式五:柱式高耐腐蝕性雙面電動車充電系統

 

The CB charging column is a free-standing, two-sided charging station with the same features as the CA column but made of stainless steel sheet instead and with a smart design Suited for private and public open areas and for environments requiring greater corrosion resistance.

技術參數TECHNICAL CHARACTERISTCS:

Rated current
16A-32A
rated voltage
400V AC
Frequency
50-60Hz
Insulation voltage
500V
Protection degree
IP54
Operating temperature
-25°C to + 40°c
Material
AISI 304 steel
Glow Wire test:
-
IK grade at 20°c
IK10
Colour
Satin-finished
Installation
Free standing
Saline solution
Resistant
UV rays Resistant

 

特點FEATURES:

 

- Mode 3 charging with PWM pilot circuit

 

- Identification of the connected cable size

 

- Protection against overloads and indirect contacts

 

- Measurement of power output and current drawn

 

- Control of proper contactor opening

 

- Identification of user authorized to the charging

 

- Management of cover locking and plug interlock system

 

- Management of charging in case of power failure

 

- Operation in free stand-alone or personal mod

 

- Set up for serial communication

 

認證REFERENCE STANDARDS:

EN61851-1 (2011)
Electric vehicle conductive charging systen
Part 1: General requirement.
 
EN61439-1 (2011)
APPLICATION EXAMPLES

 

 

款式六:集合充電、能源、通訊和服務於一身的電動車充電系統

 

RES(ource)is more than just an equipment device used to charge electric vehicles. RES(ource)is also a source of energy, communication and services. A successful blend of design and functionality, it expresses through its shape and colours the vocation to fit in historical, architectural and valuable landscapes, typical of the Italian scenery.

技術參數TECHNICAL CHARACTERISTCS:

Rated current
32A
rated voltage
400V AC
Frequency
50-60Hz
Insulation voltage
500V
Protection degree
IP54
Operating temperature
-25°C to + 40°C
Material
Corten steel- Steel shee
Glow Wire test:
-
IK grade at 20°c
IK10
Colour
Oxidized (rust-like)-grey
Installation
Free-standing
Saline solution
Resista
UV rays Resistant

 

特點FEATURES:

 

- Mode 3 charging with PWM pilot circuit
 
- Identification of the connected cable size
 
- Protection against overloads and indirect contacts
 
- Measurement of power output and current drawn
 
- Control of proper contactor opening
 
- Management of service based on the available credit
 
- Management of cover locking and plug interlock system
 
- Management of charging in case of power failure
 
- Operation in free stand-alone or personal mode
 
- Set up for serial communication

 

認證REFERENCE STANDARDS:

EN61851-1(2011)
Electric vehicle conductive charging syster
Part 1: General requirements.
 
EN61439-1 (2011)
Low-voltage switchgear and control gear assemblies
Part 1: General requirements.

 

 - 聯絡資料

 
款式繁多,不能盡錄。歡迎直接聯絡查詢。
※ 香港五金網會員享特別優惠!
聯絡人:陳生
查詢熱線:9651 - 4151 / 3488 - 0455
WhatsApp:9651 - 4151
傳真:3488 - 7190
電郵:cdjgroup.metal@gmail.com

產品訂購說明內容

陳生(Mars) - 請電9651 4151
3488 0455
9651 4151(致電/WhatsApp)
3488 7190
我是五金網會員? 立即登錄查看

還不是會員? 免費註冊

免責聲明:
(1)以上所展示的信息由企業自行提供,內容的真實性、準確性和合法性由發布企業負責,香港五金網對此不承擔任何保證責任。
(2)同時我們鄭重提醒各位買/賣家,交易前請詳細核實對方身份,切勿隨意付款或發貨,謹防上當受騙。如發現虛假信息,請向香港五金網舉報。

特色產品

點擊︰[field_product_views]
刊登日期:2018-02-09 17:04
更新日期:2018-05-26 06:36
加入購物車成功!按此前往購物車!