English Version
----------------------
Vitroguard® NanoProof SPRAY is the latest concept in Waterproofing Technoloties. Following on from the success of Vitroguard® Nanoproof, an immersion non-breaking technique, the Nanoproof SPRAY creates an instant nanotechnology barrier to repel water from the treated area. Especially useful in areas where Nanoproof or other waterproofing methods cannot be used, the NanoProof SPRAY can be used in a power spray to access those ‘out of reach’ areas.
How it works?
Water seepage and leakages comes in different shapes and sizes, and in different areas. Common leakages are caused by ageing materials, long-term battles with the harsh elements, or just poor craftsmanship. In some cases, a full overhaul is required, and it is usually costly. However, in most cases, only minor fixes are required. Vitroguard® Nanoproof SPRAY is able to provide that quick fix with a long lasting durability.
Using the nanotechnological crystallization, once an area is treated with Nanoproof SPRAY, the solution seeps underneath the top layer and crystallizes, creating a barrier against any moisture coming through. The nanotechnology layer has a long-lasting durability, and is highly resistant to harsh elements and chemincals such as UV rays and bleach.
Dosage References:
500ml product can cover:
• 3-4m2 (30-40ft2) Ceramic surfaces OR 1-2m2 (10-20ft2) Concrete surfaces
Dosage on other surfaces will depend on moisture absorption rate of each substrate. This dosage is only for reference. Actual amount of product used is based on the substrate and severity of the problem. Penetration into gaps of less than 1mm width, 20-50mm in size. Area must be partially dry before treating